60L Walk-Behind Salt Spreader for Winter Service – Red/Black with 14" Pneumatic Tyres
This 60-litre walk-behind salt spreader is designed for winter maintenance on larger paths, driveways, yards, parking areas and commercial outdoor spaces. The robust red and black design combines a large-capacity hopper with a wide spreading range, large pneumatic wheels and an adjustable material flow control.
With a capacity of 125 lb / approximately 60 litres, the spreader is particularly suitable for applications where larger areas need to be treated without frequent refilling. The specified spreading width of 10 to 12 ft corresponds to approximately 3.05 to 3.66 metres, allowing suitable spreading material to be distributed over a wide area with each pass.
60-Litre Capacity for Larger Winter Service Areas
During snow and icy conditions, long driveways, walkways and commercial areas often require substantial quantities of spreading material. A small hopper may need to be refilled frequently, interrupting the work. With its 60-litre capacity, this walk-behind spreader is designed for longer working periods between refills.
The spreader can be used for private and commercial winter maintenance, including around workshops, warehouses, business premises, parking areas and larger properties.
-
125 lb / approx. 60-litre capacity: large hopper for extended spreading applications.
-
Approx. 3.05–3.66 m spreading width: wide material distribution with each pass.
-
14-inch pneumatic tyres: large, robust wheels for paved and uneven outdoor surfaces.
-
Handle-mounted rate control: allows precise adjustment of the spreading quantity.
-
Heavy-duty aluminium gear: robust mechanical drive system for the spreading mechanism.
-
Screen and rain cover: support controlled material flow and help protect the hopper contents from moisture from above.
-
Red and black finish: practical design for regular winter maintenance work.
Wide 10–12 ft Spreading Range
The specified spreading width is 10 to 12 ft, equivalent to approximately 3.05 to 3.66 metres. This allows the spreader to cover an area considerably wider than the machine itself, reducing the number of passes required on larger driveways, yards and parking areas.
The actual spreading distance can vary depending on the type of material used, the selected rate setting and walking speed. This allows the spreader to be adapted to different working conditions.
Precise Rate Control Directly on the Handle
The rate setting control on the handle allows the material flow to be adjusted during use. Different surface conditions do not always require the same quantity of spreading material. Light frost may need a lower setting, while more heavily affected sections may require a higher material flow.
Adjusting the rate helps distribute material more consistently and allows the operator to adapt the spreader to different sections of the working area.
Large 14-Inch Pneumatic Tyres
The spreader is equipped with 14-inch pneumatic wheels. Their larger diameter helps the loaded unit move over outdoor surfaces that are not completely smooth.
Snow residue, paving joints, uneven surfaces and minor ground irregularities can make small wheels difficult to move. The robust pneumatic tyres therefore provide a practical solution for regular outdoor winter service.
Heavy-Duty Aluminium Gear
The spreading mechanism is driven through a heavy-duty aluminium gear. As the spreader is pushed forward, wheel movement is mechanically transferred to the spreading system, distributing the material across the selected working width.
The unit is manually operated and does not require an electric drive. This makes it suitable for paths, yards and other areas where a motorised spreading machine is not required.
Screen and Rain Cover for Winter Use
A screen is included in the hopper to support the material supply to the spreading mechanism. It can help prevent larger clumps or unsuitable coarse pieces from reaching the outlet area.
The included rain cover helps protect the hopper contents from direct moisture from above during operation or short interruptions. This is particularly useful in winter because damp spreading material may form clumps and become more difficult to distribute evenly.
Suitable for Different Winter Maintenance Applications
The combination of the large hopper, wide spreading range, adjustable rate control and 14-inch wheels makes this walk-behind spreader suitable for various private and commercial applications.
-
Footpaths: for distributing suitable spreading material during icy or snowy conditions.
-
Driveways: for longer private and commercial access areas.
-
Parking areas: for treating larger walking and driving zones.
-
Commercial yards: for winter maintenance around workshops and storage facilities.
-
Property paths: for recurring spreading work over longer routes.
-
Commercial outdoor areas: for regular winter service on larger surfaces.
Technical Specifications
| Feature |
Specification |
| Product type |
Walk-behind salt spreader |
| Capacity |
125 lb / approx. 60 litres |
| Spreading width |
10–12 ft / approx. 3.05–3.66 m |
| Tyre size |
14 inches |
| Tyre type |
Pneumatic tyres |
| Gear system |
Heavy-duty aluminium gear |
| Rate adjustment |
Control on handle |
| Equipment |
Screen and rain cover |
| Colour |
Red / Black |
| Operation |
Manual / walk-behind |
Walk-Behind Spreader for Controlled Winter Service
Distributing salt or other suitable spreading material manually can result in uneven application. Some areas may receive too much material while other sections receive too little. This 60-litre walk-behind salt spreader supports more controlled and consistent distribution over larger working areas.
The combination of a large 60-litre hopper, approximately 3.05 to 3.66 metre spreading range, 14-inch pneumatic tyres and adjustable material flow makes the spreader particularly suitable for recurring winter maintenance. The larger capacity also reduces the number of refilling stops when longer paths or larger properties need to be treated.
Scope of Delivery
- 1 x 60-litre walk-behind salt spreader
- 1 x rain cover
