Anodized Aluminium Rear Rim 2.50 x 18 with 36 Spoke Holes in Classic Gold
This anodized aluminium rim in size 2.50 x 18 inch is intended for building, repairing or restoring motorcycle rear wheels with a spoke system. The rim features 36 spoke holes and an externally measured overall width of approx. 7.3 cm. The surface is anodized in Classic Gold, providing a classic gold appearance for corresponding motorcycle wheel builds.
2.50 x 18 Inch Rim for Motorcycle Spoke Wheels
With its 2.50 x 18 inch size, this rim is designed for corresponding motorcycle rear wheels with a spoke construction. Actual compatibility always depends on the complete wheel setup. In addition to the rim size, the wheel hub, spoke count and the position and alignment of the spoke holes must also be taken into account.
The externally measured overall width of the rim is approx. 7.3 cm or 73 mm. This measurement is particularly useful when replacing an existing rim. A direct comparison with the previous rim can help identify differences in width and construction before rebuilding the wheel.
-
2.50 x 18 inch rim size: for corresponding motorcycle rear wheels with a spoke system.
-
36 spoke holes: for wheel builds with a compatible 36-spoke hub and suitable spoke set.
-
Approx. 7.3 cm external width: equivalent to approximately 73 mm overall external width.
-
Classic Gold colour: classic gold tone for a distinctive and timeless rim appearance.
-
Anodized surface: refined aluminium surface in Classic Gold.
-
Aluminium construction: robust and comparatively lightweight design for motorcycle spoke wheels.
-
Rear wheel version: intended for corresponding 18-inch wheel builds.
36 Spoke Holes for the Correct Rear Wheel Build
The rim features a total of 36 spoke holes. It is therefore intended for wheel assemblies using a corresponding 36-spoke hub and a suitable spoke set.
However, the number of spoke holes alone is not sufficient to determine compatibility. The angle, position and alignment of the individual holes must also match the existing rear wheel hub and the spokes being used. Two rims can have the same size and spoke count while still using a different spoke pattern.
If you are replacing an existing rim, compare the 2.50 x 18 inch size, the 36 spoke holes, the externally measured width of approx. 7.3 cm and the spoke-hole arrangement directly with the previous component.
Classic Gold for Traditional and Custom Wheel Builds
The rim is supplied in Classic Gold. This gold shade is suitable for classic motorcycle restorations as well as enduro, off-road and individual custom projects where a gold rear rim is desired.
As several different gold shades are available in our range, please pay attention to the exact colour designation when selecting your rim. This is particularly important when combining the rim with an existing front or rear rim and a visually consistent appearance is required.
Anodized Aluminium Rim for Repair and Wheel Rebuilds
A damaged, distorted or heavily stressed rim may require replacement of the rim itself or a complete rebuild of the spoke wheel. This 2.50 x 18 inch aluminium rim can be used as the basis for such work, provided that the hub, spokes and other wheel components are technically compatible.
The anodized surface refines the aluminium and provides the characteristic Classic Gold appearance. Aluminium is widely used for motorcycle rims because it combines structural stability with comparatively low weight. The rim is therefore suitable for repairs, restorations and individual motorcycle wheel builds.
Technical Specifications at a Glance
| Feature |
Specification |
| Product type |
Aluminium rim / spoke rim |
| Position |
Rear wheel |
| Rim size |
2.50 x 18 inch |
| External width |
Approx. 7.3 cm / 73 mm |
| Spoke holes |
36 |
| Material |
Aluminium |
| Surface |
Anodized |
| Colour |
Classic Gold |
For Repair, Restoration and Custom Wheel Builds
The rim can be used for different motorcycle spoke-wheel projects as long as its technical specifications match the existing or planned wheel construction. Especially on older motorcycles, enduro bikes, off-road builds or restoration projects, directly comparing the relevant dimensions is important.
-
Repair: as a replacement for a damaged or distorted rim with matching technical specifications.
-
Restoration: for existing motorcycle spoke wheels with corresponding dimensions.
-
Wheel rebuild: for use with a compatible 36-spoke hub and suitable spoke set.
-
18-inch rear wheels: for technically compatible motorcycle wheel builds.
-
Custom projects: for suitable custom, enduro and off-road applications.
Compare Dimensions and Spoke Arrangement Before Ordering
As this is a non-vehicle-specific rim, selection should be based on the technical specifications. An identical rim size does not automatically mean that every rear wheel hub or spoke set can be used.
Before ordering, compare the 2.50 x 18 inch rim size, the externally measured overall width of approx. 7.3 cm, the 36 spoke holes as well as their position and alignment with your existing rim.
Rim as an Individual Wheel Component
This product consists of the anodized aluminium rim. A complete spoke wheel additionally requires a technically compatible rear wheel hub, suitable spokes and the other components required for the respective wheel assembly.
Scope of Delivery
- 1 x anodized aluminium rear rim 2.50 x 18 inch in Classic Gold
Note on Colour Selection and Product Images
Please pay attention to the specified colour variant. We offer several different gold tones in our range. This item is supplied in Classic Gold.
The product images may be sample images. The width and height of the rim shown may differ from the actual item. The technical specifications stated in the product description and the respective colour designation are decisive.
