Aluminium Front Rim 2.15 x 18 with 36 Spoke Holes in Classic Gold
This aluminium rim in size 2.15 x 18 inch is intended for building, repairing or restoring motorcycle front wheels with a spoke system. The rim features 36 spoke holes and is designed for use with compatible front wheel hubs and spoke sets. The externally measured overall width is approx. 7 cm. The Classic Gold finish provides a traditional gold appearance for corresponding motorcycle wheel builds.
2.15 x 18 Inch Rim for Motorcycle Spoke Wheels
With its 2.15 x 18 inch size, this rim is intended for corresponding motorcycle front wheels with a spoke construction. Rim diameter and width are important technical factors when selecting a replacement rim. In addition, the number and arrangement of the spoke holes must match the existing wheel construction.
The externally measured overall width of the rim is approx. 7 cm. This measurement is particularly useful when replacing an existing rim. A direct comparison with the previous rim can help identify differences in dimensions and construction before rebuilding the wheel.
-
2.15 x 18 inch rim size: for corresponding motorcycle front wheels with a spoke system.
-
36 spoke holes: for wheel builds with a compatible 36-spoke hub and suitable spokes.
-
Approx. 7 cm external width: overall width measured across the outside of the rim.
-
Classic Gold colour: classic gold tone for a distinctive motorcycle appearance.
-
Aluminium construction: robust and comparatively lightweight design for motorcycle spoke wheels.
-
Front wheel version: intended for corresponding 18-inch wheel builds.
36 Spoke Holes for the Correct Front Wheel Build
The rim features a total of 36 spoke holes. It is therefore intended for wheel assemblies using a corresponding 36-spoke hub and a suitable spoke set.
However, the number of spoke holes alone is not sufficient to determine rim compatibility. The position, angle and alignment of the individual holes must also match the existing hub and the spoke set being used. Two rims can have the same dimensions and the same number of holes while still using a different spoke pattern.
If you are replacing an existing rim, compare the 2.15 x 18 inch size, the 36 spoke holes, the externally measured width of approx. 7 cm and the spoke-hole arrangement directly with the previous component.
Classic Gold for Classic and Custom Wheel Builds
The rim is supplied in Classic Gold. This gold tone is suitable for classic motorcycle restorations as well as enduro, off-road and individual custom projects where a gold-coloured spoke rim is required.
As several different gold shades are available in our range, it is important to pay attention to the exact colour designation. This is especially relevant when combining the front rim with an existing gold-coloured rear rim and a visually consistent wheel set is desired.
Aluminium Rim for Repair and Wheel Rebuilds
A damaged, distorted or heavily stressed rim may require replacement of the rim itself or a complete rebuild of the spoke wheel. This 2.15 x 18 inch aluminium rim can be used as the basis for such work, provided that the hub, spokes and other wheel components are technically compatible.
Aluminium is widely used for motorcycle rims because it combines structural stability with comparatively low weight. The rim is therefore suitable for repairs, restorations and individually built motorcycle spoke wheels.
Technical Specifications at a Glance
| Feature |
Specification |
| Product type |
Aluminium rim / spoke rim |
| Position |
Front wheel |
| Rim size |
2.15 x 18 inch |
| External width |
Approx. 7 cm |
| Spoke holes |
36 |
| Material |
Aluminium |
| Colour |
Classic Gold |
For Repair, Restoration and Custom Wheel Builds
The rim can be used for different motorcycle spoke-wheel projects as long as its technical specifications match the existing or planned wheel construction. Especially on older motorcycles, restorations or individual conversions, directly comparing the relevant dimensions is essential.
-
Repair: as a replacement for a damaged or distorted rim with matching technical specifications.
-
Restoration: for existing motorcycle spoke wheels with corresponding dimensions.
-
Wheel rebuild: for use with a compatible 36-spoke hub and suitable spoke set.
-
18-inch front wheels: for technically compatible motorcycle wheel builds.
-
Custom projects: for suitable custom, enduro and restoration applications.
Compare Dimensions and Spoke Arrangement Before Ordering
As this is a non-vehicle-specific rim, selection should be based on the technical specifications. An identical rim size does not automatically mean that every wheel hub or spoke set can be used.
Before ordering, compare the 2.15 x 18 inch rim size, the externally measured overall width of approx. 7 cm, the 36 spoke holes as well as their position and alignment with your existing rim and planned wheel construction.
Rim as an Individual Wheel Component
This product consists of the aluminium rim. A complete spoke wheel additionally requires a technically compatible wheel hub, suitable spokes and the other components required for the respective wheel assembly.
Scope of Delivery
- 1 x Aluminium rim 2.15 x 18 inch in Classic Gold
Note on Colour Selection and Product Images
Please pay attention to the specified colour variant. We offer several different gold tones in our range. This item is supplied in Classic Gold.
The product images may be sample images. The width and height of the rim shown may differ from the actual item. The technical specifications stated in the product description and the respective colour designation are decisive.
