Others also bought:
Starter clutch assy with starter ring gear for E-ton 150 Yokon / Viper / Challenger Quad ATV
Compatible with:All E-Ton 150cc Quad ATV models like Cobra and Overland 125
The Aeon models is almost always the starter ring gear is damaged!
Therefore, not only the starter clutch should be replaced but also equal the starter gear is offered fully here as in this kit.
When the starter gear is damaged slips the new free run through still!
Once these starter freewheel all the problems mounted with starter kit eliminates gear!
But if the motor of the E-ton 150 Yokon / Viper / Challenger does not start by the electric starter on the Kickstarter then it is up to 99.9 percent of the starter clutch and not the starter.
For this offered here complete kit here this can not happen!
The Troubleshooting if the starter clutch is faulty can be easily ascertained without disassembly.
Look on the right side of the engine, where the fan is, if you start with the electric starter, the fan moves back and forth.
If so slip the starter freewheel through and must be renewed.
To start the engine, the fan wheel must always rotate in only one direction at the E-ton 150 Yokon / Viper / Challenger!
measurements:
Number of teeth: 60
Inner diameter of starter clutch assy on the shaft: 22mm
Total thickness: 21mm
Manufacturer: | motorsportgoetz |
Category: | Electro starter |
SKU: | 14766 |
Displacement: | 150 |
Brand: | E-Ton |
Type of vehicle: | Quad ATV UTV |
Model: | YukonChallengerViper |
0