Anodized Aluminium Rim Set Front and Rear in Racing Gold for Yamaha DT Models
This anodized aluminium rim set in Racing Gold consists of one front and one rear rim and is intended for various Yamaha DT models. The front rim has a size of 1.60 x 21 inch and an externally measured width of approx. 5.5 cm. The rear rim has a size of 1.85 x 18 inch and an externally measured width of approx. 6 cm. Both rims are made from aluminium and feature 36 spoke holes each.
The anodized Racing Gold surface gives both rims a strong, darker gold appearance. The set is particularly suitable for repairs, restorations and complete rebuilds of corresponding Yamaha DT spoke wheels where both the front and rear rims are to be renewed together.
Complete Rim Set for Front and Rear Wheel
The set contains two rims with different dimensions for the front and rear wheel. The combination of 1.60 x 21 inch at the front and 1.85 x 18 inch at the rear covers the corresponding wheel configuration of the Yamaha DT models listed below.
-
Front rim 1.60 x 21 inch: aluminium rim with 36 spoke holes and approx. 5.5 cm external width.
-
Rear rim 1.85 x 18 inch: aluminium rim with 36 spoke holes and approx. 6 cm external width.
-
36 spoke holes per rim: for corresponding 36-spoke wheel constructions.
-
Racing Gold colour: strong, darker gold shade for both front and rear rims.
-
Anodized surface: refined aluminium finish on both rims.
-
Aluminium construction: stable and comparatively lightweight design for motorcycle spoke wheels.
Matched Rim Sizes for Yamaha DT Spoke Wheels
The combination of 1.60 x 21 inch at the front and 1.85 x 18 inch at the rear is intended for the Yamaha DT models listed below. The set is particularly useful when existing rims are damaged, distorted or heavily worn and both wheels are to be refurbished together.
With spoke wheels, the rim, hub and spokes must be technically compatible with each other. In addition to the rim size and number of spoke holes, the position and alignment of the holes as well as the existing wheel components must therefore be taken into account.
Technical Data of the Aluminium Rim Set
Dimensions and Specifications at a Glance
| Feature |
Front Wheel |
Rear Wheel |
| Rim size |
1.60 x 21 inch |
1.85 x 18 inch |
| External width |
Approx. 5.5 cm |
Approx. 6 cm |
| Spoke holes |
36 |
36 |
| Material |
Aluminium |
Aluminium |
| Surface |
Anodized |
Anodized |
| Colour |
Racing Gold |
Racing Gold |
Anodized Aluminium Surface in Racing Gold
Both rims feature an anodized aluminium surface in Racing Gold. The anodized finish refines the aluminium surface while also producing the characteristic darker gold colour.
As several different gold shades are available in our range, please pay attention to the exact colour designation when selecting the correct version. This rim set is supplied specifically in Racing Gold and therefore differs visually from lighter gold variants.
Suitable for Yamaha DT Models
The rim set is intended for the Yamaha DT models listed below. According to the available product data, the fitment applies to all model years of the specified variants.
| Manufacturer |
Model |
Model Year |
| Yamaha |
DT 80 LC |
All model years |
| Yamaha |
DT 125 LC |
All model years |
| Yamaha |
DT 125 R |
All model years |
| Yamaha |
DT 125 RE |
All model years |
| Yamaha |
DT 125 X |
All model years |
For Repair, Restoration and Complete Wheel Rebuilds
Damaged or distorted rims can make it difficult to tension the spokes evenly or rebuild a wheel correctly. This set provides both the front and rear rims together and is therefore particularly useful when both wheels are to be renewed during a restoration or complete rebuild.
-
Repair: for replacing damaged or distorted rims.
-
Restoration: for corresponding Yamaha DT models with spoke wheels.
-
Complete wheel rebuild: front and rear rims supplied as a coordinated set.
-
Racing Gold appearance: both rims supplied in the same darker gold shade.
-
36-hole design: both rims feature 36 spoke holes each.
Compare Wheel Components Before Rebuilding
Even with the specified vehicle fitment, the existing spoke-wheel components should be checked before rebuilding. In addition to the rim size, the wheel hub, spoke set and the position and angle of the spoke holes are particularly important.
For the front wheel, the relevant specifications are 1.60 x 21 inch, an external width of approx. 5.5 cm and 36 spoke holes. For the rear wheel, the relevant specifications are 1.85 x 18 inch, an external width of approx. 6 cm and likewise 36 spoke holes.
Rims as Components of the Spoke Wheel
This set consists of the two anodized aluminium rims for the front and rear wheel. The corresponding hubs, spokes and other wheel components are required to build complete spoke wheels.
Scope of Delivery
- 1 x anodized aluminium front rim in Racing Gold
- 1 x anodized aluminium rear rim in Racing Gold
Note on Colour Selection and Product Images
Please pay attention to the specified colour variant. We offer several different gold tones in our range. This rim set is supplied in Racing Gold.
The product images may be sample images. Slight visual colour differences may occur due to lighting, display settings or image reproduction. The technical specifications stated in the product description and the Racing Gold colour designation are decisive.
