Ignition Coil Complete Set for Kawasaki, Suzuki and Yamaha Models
This ignition coil with ignition cable is designed as a replacement part for selected Kawasaki, Suzuki and Yamaha motorcycles and ATV models. It is suitable for vehicles that use a compatible 2-pin ignition coil connection and is supplied as a complete set with ignition cable. If the engine starts poorly, runs unevenly, misfires under load or loses ignition stability at higher revs, a worn or faulty ignition coil can be one of the possible causes. This replacement ignition coil supports a stable high-voltage supply to the spark plug and helps the ignition system provide the spark required for consistent combustion.
The component is manufactured in high-quality OEM-style quality and is intended to replace the original ignition coil on the listed vehicle models. With a total length of 48 mm and a diameter of 29 mm, the dimensions should be checked against the existing part before ordering. This is especially important for older motorcycles and ATVs, as wiring harnesses, connectors or ignition components may have been changed over the years.
Stable Ignition Performance for Reliable Engine Operation
The ignition coil is a key component of the ignition system. It converts the vehicle’s electrical voltage into the high voltage required to create the spark at the spark plug. When the ignition coil becomes weak, damaged or unstable, the engine may no longer receive a consistent spark. Common symptoms include difficult starting, rough idle, hesitation during acceleration, ignition dropouts or misfiring in damp conditions.
-
Ignition coil with ignition cable: complete replacement set for the existing ignition component.
-
2-pin connection: suitable for the listed Kawasaki, Suzuki and Yamaha models with matching connector type.
-
OEM-style quality: designed for dependable function in regular vehicle use.
-
Compact dimensions: total length 48 mm and diameter 29 mm.
-
Wide model coverage: suitable for selected motorcycles and ATV models from Kawasaki, Suzuki and Yamaha.
Typical Ignition Problems and the Matching Technical Solution
Many riders look for a replacement ignition coil when the vehicle becomes difficult to start or when the engine begins to run unevenly. A weak ignition coil can cause the spark to become irregular or too weak, which affects combustion. This can be noticeable during cold starts, acceleration, low-speed riding or continuous operation under load. This ignition coil complete set provides a practical replacement option when the original ignition coil or the connected ignition cable is worn, damaged or no longer functioning correctly.
-
Problem: the engine starts poorly. A correctly functioning ignition coil supports stable high-voltage generation for the spark plug.
-
Problem: misfiring while riding. The complete set with ignition cable helps replace a faulty ignition component in the ignition circuit.
-
Problem: rough idle or engine hesitation. A stable ignition supply can support smoother engine operation.
-
Problem: old or damaged ignition cable. The supplied ignition cable allows the related cable component to be replaced together with the coil.
Technical Data of the Ignition Coil
| Feature |
Specification |
| Product type |
Ignition coil complete set |
| Version |
Ignition coil with ignition cable |
| Connection |
2 pins |
| Total length |
48 mm |
| Diameter |
29 mm |
| Quality |
High-quality OEM-style quality |
Compatible Vehicle Models and Years
| Model |
Year |
Manufacturer |
| 125 KMX |
1986-2002 |
Kawasaki |
| 125 ZL Eliminator |
Not specified |
Kawasaki |
| 220 KLF Bayou |
1986-2002 |
Kawasaki |
| 250 KLF Bayou |
2003-2012 |
Kawasaki |
| 250 KLX R |
1994-1996 |
Kawasaki |
| 300 KLX R |
1997-2007 |
Kawasaki |
| 300 KVF A Prairie 4x4 |
1999-2002 |
Kawasaki |
| 300 KVF B Prairie 4x4 |
1999-2002 |
Kawasaki |
| 360 KVF A Prairie |
2003-2010 |
Kawasaki |
| 360 KVF B Prairie |
2003-2010 |
Kawasaki |
| 360 KVF C Prairie 4x4 |
2003-2010 |
Kawasaki |
| 400 KVF C Prairie |
1999-2002 |
Kawasaki |
| 400 KVF D Prairie |
1999-2002 |
Kawasaki |
| 650 KLR |
1987-2007 |
Kawasaki |
| 650 KLX R |
1993-2001 |
Kawasaki |
| 650 KVF Brute Force |
2005-2011 |
Kawasaki |
| 700 KVF Prairie 4x4 |
2004-2006 |
Kawasaki |
| 750 KRF Teryx 4x4 |
2008-2013 |
Kawasaki |
| 750 KVF Brute Force |
2005-2007 |
Kawasaki |
| 125 DR SSF42A |
1985 |
Suzuki |
| 600 XT |
1987-1990 |
Yamaha |
| 600 XT K |
1991-1993 |
Yamaha |
| 600 XT Z Tenere |
1986-1990 |
Yamaha |
Original spare part reference numbers:
129700-1450 (J0145), 129700-1300/1301, 21121-1160, 21121-0018, 21121-1152, 21121-1229, 21121-1292/1306, 33410-42A00/18A00, 33410-05G00, 2KF-82310-00/50
Important Compatibility Information
Before ordering, please check whether your vehicle is listed in the compatibility table and whether the existing ignition coil uses the same 2-pin connection. The dimensions should also be compared with the installed part: this ignition coil has a total length of 48 mm and a diameter of 29 mm. For older motorcycles and ATV models, it is advisable to inspect the connector type, cable routing and ignition system layout, as previous repairs or modifications may affect compatibility.
Suitable for Maintenance, Repair and Replacement
This ignition coil set is suitable for replacing defective, worn or ageing ignition coils. Since the ignition cable is included, the related cable section can be renewed at the same time. This is useful when the existing cable is brittle, damaged, corroded or no longer seated correctly. A stable connection between ignition coil, ignition cable and spark plug cap is important for consistent spark delivery.
For correct function, the ignition system should be checked as a whole. Relevant components include plug connections, ground points, spark plug, spark plug cap and the condition of the ignition cable. If the engine continues to run unevenly after replacing the ignition coil, other ignition or fuel system components may also need to be inspected.
Product Features and Practical Benefits
-
Replacement for original ignition coil: suitable for the listed Kawasaki, Suzuki and Yamaha vehicles.
-
Complete set: includes ignition coil and ignition cable for a coordinated replacement.
-
For 2-pin systems: designed for vehicles with the corresponding connector layout.
-
Compact size: 48 mm total length and 29 mm diameter for comparison with the installed part.
-
Technical repair solution: suitable when ignition dropouts, weak spark or cable damage indicate a faulty ignition component.
Delivery Contents
- 1 x ignition coil with ignition cable
Terms
ignition coil Kawasaki, ignition coil Suzuki, ignition coil Yamaha, ignition coil with ignition cable, motorcycle ignition coil 2 pin, Kawasaki KLR 650 ignition coil, Yamaha XT 600 ignition coil, Kawasaki Bayou ignition coil, Kawasaki Brute Force ignition coil, replacement motorcycle ignition coil.
