Handlebar end indicator Titan pair indicator LED complete set Akron LED handlebar indicator complete set pair in black
HIGHSIDER AKRON-FLASH 2in1 LED handlebar end indicator, elegant handlebar end with flashing function and position light, CNC milled aluminum housing, pearl-blasted black satin finish with anodized cap in black, tinted glass, E-approved, pair.
HIGHSIDER AKRON-FLASH LED handlebar end indicator / position light, E-approved as a front direction indicator
- shapely handlebar end with flashing function and position light -
With these 2in1 handlebar end indicators, HIGHSIDER again shows a real sense of excellent design and best functionality. The ultra-bright turn signal lights of the latest generation from HIGHSIDER, with adjustable angle of blink, provide unmistakable directional indicators.
The handlebar end indicators with tinted glass, high-quality CNC milled aluminum housing and characteristic cap are simply beautiful.
So harmoniously packaged, the front direction indicators literally disappear from the vehicle when not in use.
Easy to assemble thanks to the clamping system with various sleeves.
Universally suitable for 7/8, 1 inch or X-Bar tube handlebars with an inner diameter of 12 to 22 mm. The cables are laid in the handlebars and have a good length of approx. 100 cm to lay.
Look forward to the HIGHSIDER AKRON-FLASH LED handlebar end indicator, which are by no means commonplace.
Make a mark - with the innovative turn signal series from HIGHSIDER you not only show where you want to go, but also who you are.
This is trend-setting design at its best.
Accessories TIP:
The optionally available HIGHSIDER PL CONTROL-BOX CB2 switches the position light off during the flashing process and comes on again after the flashing process (with a small delay).
Dimensions:
Width: 36mm
Diameter: 34.5 mm
Cable length: approx. 1000 mm
The angle of the light modules is infinitely adjustable by 26 °.
Connections:
Power consumption: 13.5V, 0.27A, 3.65W and 13.5V, 0.11A 1.49W
Yellow cable = blinker (+)
Black cable = ground (-)
Scope of delivery: 1 pair
2 x clamping sleeves Ø 13 mm, Ø 16 mm
3 x centering rings
2 x central screw M6 with fastening ring for the HIGHSIDER AKRON-FLASH, and conical nut M6.
Note:
Resistors or a flasher relay may be necessary for correct flashing.
