Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Fuel cap for Suzuki DR 600 lockable

SKU: 31623274
GTIN: 4058429295312
Category: DR 600
Manufacturers: Götz

Threaded fuel tank cap: suitable for selected Suzuki TS, DR 600 and DR 650 models.
Tank filler thread approx. 52–54 mm: important dimension for correct fitment on the existing fuel tank.
Outer diameter approx. 83 mm: useful for additional comparison with the existing fuel cap.
Suitable for Suzuki TS and DR: including TS 50, TS 80, TS 125 X, TS 250 X, DR 600 and DR 650 from 1992.
For original metal fuel tanks: on Suzuki DR 600 not intended for retrofitted plastic or aftermarket tanks.
Check dimensions before ordering: especially on older motorcycles where the fuel tank may have been replaced.

9,55 €

incl. 19% VAT , plus

Manufacturers recommended retail price: 10,99 €

(Save 13.1%, i.e. 1,44 €)

Available immediately
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

piece

Fuel cap lockable black
Fuel Tank Cap with Thread for Suzuki TS 50, TS 80, TS 125 X, TS 250 X, DR 600 and DR 650

This threaded fuel tank cap is intended for various Suzuki motorcycles from the TS, DR 600 and DR 650 model ranges. The cap has an outer diameter of approx. 83 mm and is designed for tank filler necks with a thread of approximately 52–54 mm. It is therefore suitable as a replacement for compatible original fuel caps on the motorcycles listed below.

A worn, damaged or poorly closing fuel tank cap should be replaced with a part that matches the existing tank opening. Especially on older motorcycles, it is advisable to compare not only the vehicle model but also the actual dimensions of the tank filler neck. The thread diameter of the tank opening is particularly important.

Technical Dimensions of the Fuel Tank Cap

Product type: Threaded fuel tank cap
Outer diameter: approx. 83 mm
Thread diameter at tank filler neck: approx. 52–54 mm
Design: Screw-on cap for compatible metal fuel tank
Vehicle brand: Suzuki

Compare the Thread Before Ordering

For fuel tank caps, the vehicle model alone is not always sufficient for correct identification. The thread of the cap must match the existing tank filler neck. The cap described here is intended for an opening of approximately 54 mm; depending on the measuring point, the measured thread diameter may be around 52–53 mm.

Before ordering, compare the outer diameter of the existing fuel cap as well as the thread diameter of the tank filler neck. This is particularly important on older motorcycles, as fuel tanks may have been replaced or converted to aftermarket parts over the years.

Suitable for Various Suzuki TS and DR Models

The fuel tank cap is intended for several classic Suzuki enduro and off-road motorcycles. These include various models from the TS range as well as the DR 600 and DR 650.

Manufacturer	Model	Year
Suzuki	TS 50	depending on version
Suzuki	TS 80	depending on version
Suzuki	TS 125 X	depending on version
Suzuki	TS 250 X	depending on version
Suzuki	DR 600	depending on version
Suzuki	DR 650	from 1992

Original Part Numbers for Additional Comparison

Original Suzuki spare part reference numbers: 44200-01890 and 44200-05812 – for comparison purposes only.

These reference numbers can be used in addition to the vehicle list and the stated dimensions. The actual tank version and the dimensions of the filler neck remain decisive for correct fitment.

Why the Tank Version Is Important on Older Motorcycles

Especially on older Suzuki motorcycles, the fuel tank may have been replaced during the vehicle's service life. A visually similar fuel cap may therefore not fit even if the motorcycle model is listed, particularly when a different fuel tank has been installed. Aftermarket and plastic tanks can use a different filler opening or thread.

If the original fuel tank cap is missing and a direct comparison is not possible, the tank filler neck should be measured carefully. For this cap, a tank opening of approximately 54 mm is the relevant reference dimension.

Key Features at a Glance

Threaded fuel tank cap: for compatible Suzuki metal fuel tanks.
Outer diameter approx. 83 mm: useful for checking the cap size.
Tank filler thread approx. 52–54 mm: important dimension for correct fitment.
Suitable for Suzuki TS and DR: including TS 50, TS 80, TS 125 X, TS 250 X, DR 600 and DR 650.
Suitable for older motorcycles: compare dimensions with the existing fuel tank before ordering.

Scope of Delivery

1 x Fuel tank cap

Important Note for Suzuki DR 600

Suitable for Suzuki DR 600 with original metal fuel tank. Not suitable for retrofitted plastic or aftermarket tanks. Different fuel tank versions may be fitted to the DR 600, including original steel tanks and later-installed plastic tanks from aftermarket manufacturers. Please compare the tank filler neck and thread carefully before ordering.

br />suitable for:
SUZUKI
TS 50
TS 80
TS 125 X
TS 250 X
DR 600
DR 650 year 92-