Flywheel puller remove tool M28x1,5
Flywheel puller remover tool with external right thread
Thread: 28 x 1.5 mm
Buzzetti puller for the flywheel (outer rotor) of the alternator.
Required for work on the alternator, underlying components and when changing crankshafts and crankshaft bearings.
The flywheel wheel puller is screwed into the pole wheel and brought to tension with the help of the jacking screw.
If the rotor does not loosen under pressure, you can carefully use small hammer blows on the jacking screw of the puller.
You do not need many special tools on the scooter.
But this is one of the most important and most used for the scooter.
Please check the size of the push-off thread on the flywheel before ordering.
This puller has a M28x1,5mm thread
0