Exhaust Honda NX650 Dominator 88-96 with e-mark stainless steel inox

Exhaust Honda NX650 Dominator 88-96 with e-mark stainless steel inox

379,95 €

incl. 19% VAT , plus

Manufacturers recommended retail price: 499,00 €

(Save 23.86%, i.e. 119,05 €)

Set

Available immediately

Delivery status: 1-4 days

Delivery time: 1 - 3 Workdays

Order within the next 23 hours and 51 minutes and 00 seconds and we will ship your order tomorrow .

Exhaust Honda NX650 Dominator 88-96 with e-mark stainless...

379,95 €

incl. 19% VAT , plus

Set

Exhaust Honda NX650 Dominator 88-96 with homologation e-mark street legal in stainless steel inox

Especially for the Honda NX650 Dominator 88-96 all models constructed and developed on the power labor of Turbo Kit.
The exhaust is 2-1 exhaust.
Both front pipes goes together in one exhaust rear.

Focus of the construction was improved the torque curve with additional power extraction!

The exhaust has been repeatedly tested and validated on the Honda NX650 Dominator 88-96 for optimum performance development!

High quality fine workmanship which has been perfected by many details!
Visually very beautifully shaped exhaust system with the smallest possible outer dimensions and low weight.

The exhaust is the Honda NX650 Dominator 88-96 the perfect deep bass sound.

When removing the DB killer (which is very quick and easy going ), the exhaust system is again huge!
Since it has been paramount in the development utmost importance to Highest possible optimized performance,

Properties of this new sport exhaust for Honda NX650 Dominator 88-96:

- Performance gains of 5-10 % depending on the mounted state of the Honda Dominator and possibly other accessories.
- Low weight
- Small outside dimensions
- With E-mark approval for road.
- Complete exhaust system 2-1 for original front pipe.
- Spring mounts are also strong vibration withstand
- Perfect deep bass sound
- DB Killer easily removable (held only with feathers, therefore can not be lost , etc.)
- Louder 96DB killer for more power and better sound >>>>>>>klick here
- Exhaust system stainless steel adapter, rear exhaust in aluminium with very nice high quality carbon end cap.
- Turbo Kit manufacturer with many years of experience of the racing world
- Fine high quality exhaust product.

Delivery: complete exhaust kit slip on in inox / stainless steel for original front pipe with all parts to mount (exhaust we delivery with one clamp) and e-mark homologation and 80DB killer.

Here is a movie with sound sample on a comparable exhaust system at the Yamaha XT 600:

Manufacturer:	Turbo Kit
Category:	NX 650 / 500 / 400 Dominator
SKU:	NX650-005-inox
GTIN:	4057711024074
Displacement‍:	650
Brand‍:	Honda
Brand‍:	Turbo kit
Type of vehicle‍:	Motorcycle
Material‍:	Stainless steel
Model‍:	NXDOMINATOR
Tuning‍:	More power, higher top speed
Street legal‍:	e-approval

5 Stars

4 Stars

3 Stars

2 Stars

1 Star

Share your experiences with other customers!:

Gute Fertigungsqualität, aber knappe Passung

Habe den Auspuff zusammen mit den Edelstahlkrümmern an meiner 95er Honda Dominator RD08 montiert. Die Produktqualität ist sehr gut, zwei Anmerkungen aber:
1. bei der Montage braucht es sehr viel Geduld, um die Anlage spannungsfrei und ohne Kontakt zum Motor oder Rahmen zu montieren. Um der Anlage mehr Stabilität zu geben, habe ich am Rahmen an der Stelle im Rahmendreick, an der die Originalhalter für den Auspuff sind eine Zusatzhalterung gebaut, die am unteren Krümmerflansch befestigt ist.
2. die Halteschellen für den Auspuff könnten etwas mehr Material vertragen am oberen Ende bei den Schraublöchern. Das ist sehr minimal, was da vorhanden ist. Von den mitgelieferten Montagehalterungen konnte ich keine an meiner Domi verbauen, die passten alle nicht. Habe auch hier etwas selber gebaut.

Die Dokumention des Umbaus findet ihr in ein paar Wochen unter https://kettenritzel.cc/
>Alexander H., 04.04.2023

Total entries: 1