Similar items
Dynojet Power Commander Yamaha FZ8 tuning injection
Fuel control for each individual cylinder in a smaller enclosure
"Warm up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
fit by follow models:
Brand model cc year country engine Info position
YAMAHA FZ8 N 779 2011 AMERICA
YAMAHA FZ8 N 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N ABS 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N 779 2012 AMERICA
YAMAHA FZ8 N 779 2012 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N ABS 779 2012 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S Fazer 779 2011 AMERICA
YAMAHA FZ8 S Fazer 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S ABS Fazer 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S Fazer 779 2012 AMERICA
YAMAHA FZ8 S Fazer 779 2013 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S ABS Fazer 779 2013 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N 779 2011 AMERICA
YAMAHA FZ8 N 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N ABS 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N 779 2012 AMERICA
YAMAHA FZ8 N 779 2012 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 N ABS 779 2012 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S Fazer 779 2011 AMERICA
YAMAHA FZ8 S Fazer 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S ABS Fazer 779 2011 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S Fazer 779 2012 AMERICA
YAMAHA FZ8 S Fazer 779 2013 EUROPE 106 PS/ 78 KW
YAMAHA FZ8 S ABS Fazer 779 2013 EUROPE 106 PS/ 78 KW
Reduced size from the PCIII USB
Easy to install
USB powered from computer; 9 volt adapter is no longer needed
Two-position map switching function built in
Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
Gear/speed input allows for map adjustment based on gear
Analog input allows user to install any 0-5 volt sensor
Builds an adjustment table based on analog input such as boost or temperature
Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
More tuning ranges than PCIII USB
Map switch can be mounted to change between two different maps that have been pre-loaded to the Power Commander V; available separately
Enhanced "accel pump" utility
For Offroad and ATV, see appropriate catalog under Moose Power Commanders
Made in the U.S.A.
SECONDARY FUEL MODULE (S.F.M.)
Allows for the adjustment of all eight-injectors
Connects to the upper injector rail using OEM connectors
Single cable connection to the PCV
Adjust both upper and lower injectors by as much as +250/-100%
If gear position input is connected to your PCV, you can adjust all of the injectors on a "per gear" basis
You can also map each injector separately; giving you up to 48 complete maps
The "basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
The "basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes, which provides added fuel control and shifter functionality
See application chart for availability
QUICK SHIFTER EXPANSION MODULE (Q.E.M.)
The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
The QEM connects to the upper injectors and then into the PCV
Once the sensor is attached you will have full Quick Shifter functionality
NOTE: QEM is not necessary if using the SFM.
Manufacturer: | Dynatek |
Category: | Yamaha |
SKU: | 22040 |
Type of vehicle: | Motorcycle |
Model: | FAZERFZFZ8 |
Tuning: | More power, higher top speed |
0