Drive face boss / vario bushing Rex, Jinan Qingqi, Shenke, Huatian, RS 450, QM50QT-6A variator sleeve

7,95 €
incl. 19% VAT , plus shipping costs (Warenpost)
Manufacturers recommended retail price: 14,90 €
(Save 46.64%, i.e. 6,95 €)
Drive face boss / vario bushing Rex, Jinan Qingqi, Shenke, Huatian, RS 450, QM50QT-6A variator sleeve
Set
Available immediately

Delivery status: 1-4 days

Delivery time: 1 - 3 Workdays

Order within the next 5 hours and 59 minutes and 00 seconds and we will ship your order today .
Drive face boss / vario bushing Rex, Jinan Qingqi, Shenke, Huatian, RS 450, QM50QT-6A variator sleeve
7,95 €
incl. 19% VAT , plus shipping costs (Warenpost)
Set

Drive face boss / vario bushing Rex, Jinan Qingqi, Shenke, Huatian, RS 450, QM50QT-6A scooter tuning variator sleeve.

The tuning variator sleeve for scooter is the simplest and most effective method for more performance gain.

The variator as the transmission at switching vehicles at the heart of the drive of an scooter.
Modified variator sleeve Drive face boss / vario bushing Rex, Jinan Qingqi, Shenke, Huatian, RS 450, QM50QT-6A variator sleeve all models and variants.

The length of the sleeve is original vario the belt further pushed into a position outward.
This causes an increase in the terminal velocity of 70 km / h.
This results in the best possible tuning variant for driving range.

The Vario sleeve fits in exchange for the original Vario sleeve.
Dimensions:
Length: 37 mm
Width: 20 mm
Thickness: 3 mm

Attention!
Please note for mounting the installation instructions.

Installation instructions of the Vario sleeve:

Installation instructions / Mounting instructions vario drive face boss vario sleeve 

The variator sleeve is simply replaced with the original part.
Given the vario case is dismantled and dissolved the central nut on the crankshaft.
Thereafter, the outer pulley is deducted from the tail shaft.
The sleeve is now open.
Now hold on with one hand, the variator and remove the sleeve.
Then the Vario sleeve instead of the original sleeve refit.
The pulley touched down again.
Pay attention to the teeth.
Next, the central nut onto the crankshaft and tighten.
Additionally, however, the supplied washer is assembled as follows:
After the outer pulley was set up, the starter gear is placed.
Next on the Tail shaft pushed.
Replace and tighten Now the central nut.
Make sure that the washer is centered.
The washer is used to ensure the necessary distance to the threaded end of the crankshaft.
The tightening torques of the parent amounted to 90-100 Nm.
The Vario sleeve fits in exchange for the original Vario sleeve.
This results in the best possible tuning variant for driving range.


Manufacturer: NARAKU
Category: Baotian
SKU: 80003
GTIN: 4250362411129
Type of vehicle‍: Scooter
Model‍: Jinan QingqiShenkeHuatianQM50QT-6ARS 450
Tuning‍: More power, higher top speed

0

Write the first review for this item and help others make a purchase decision!:

Contact data
Question about item



Drive face boss / vario bushing Kymco Agility 50 variator sleeve

Buy this product now in a set!

Total price: 7,95 €
Save: 3,95 €