Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

CV boot Yamaha Rhino YXR 660 front inner

CV boot Yamaha Rhino YXR 660 front inner

SKU: 195007-Rhino660
GTIN: 4057711802696
HAN: 195007-Rhino660
Category: Rhino YXR 450 / 660 / 700 Viking
Manufacturers: All Balls Racing

CV boot kit for Yamaha Rhino YXR 660 front inner All Balls Racing

18,95 €

incl. 19% VAT , plus

Manufacturers recommended retail price: 32,90 €

(Save 42.4%, i.e. 13,95 €)

Available immediately
Delivery status: 1-4 days
Order within the next 2 days and 12 hours and 37 minutes and 00 seconds and we will ship your order on 15.12.
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Order within the next 2 days and 12 hours and 37 minutes and 00 seconds and we will ship your order on 15.12.

Set

CV boot kit for Yamaha Rhino YXR 660 front inner from brand All Balls Racing

ALL BALLS RACING CV BOOT KITS for Yamaha Rhino 660 front inner

The All Balls CV Boot material is compounded from OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s UTV’s.

- Easier to install than most OEM and aftermarket cv boots
- 40% higher tensile strength than conventional CV boot material, suitable for the high joint angles of today’s UTV’s
- 50% more abrasion resistant than conventional CV boot material to assure long life in today’s harsh off-road environments
- Rubber compound is tested to -40° C/F to assure good performance and long life at low temperatures
- cv boot kits include two stainless steel clamps that are designed to be tightened without the use of special tools
- Lithium based Molybdenum grease insures good lubrication for long CV joint life

All Balls Racing CV boot kit

- made of special DCR66 rubber
- up to 40% higher material tensile strength
- up to 50% higher abrasion resistance
- especially developed for ATV and UTV
- also tested for wear at -40 ° C

Delivery:
1x cv boot kit
2x stainless steel clamps
1x Highly loaded fat based on lithium molybdenum

Tecnical Spez.
MATERIAL Rubber | Stainless Steel
POSITION Front | Rear
INNER DIAMETER METRIC mm 17 mm Shaft | 60 mm CV Body
INNER DIAMETER U.S. inch 0.67" Shaft | 2.36" CV Body
LENGTH METRIC mm 81 mm
LENGTH U.S. inch 3.19"
STYLE Outboard | Inboard
TYPE CV Boot Kit

Product safety information

Manufacturer information:

Parts Europe GmbH
Conrad-Röntgen-Str. 2
Wasserliesch, Deutschland, 54332
TeamDach@partseurope.eu