Similar items
Flywheel puller M33x1,5 mm external thread right hand thread
Professional workshop version special tool for flywheel and rotor of the stator.
The puller is for the flywheel (rotor) of the alternator.
If work on the alternator or underlying components such as crankshaft and crankshaft bearings is necessary, the rotor or inner rotor must first be removed.
The flywheel puller is screwed onto the flywheel / rotor and brought to tension with the help of the jacking screw.
If the rotor does not loosen under pressure, you can carefully use small hammer blows (take a rubber mallet!) Carefully on the puller's forcing screw.
You do not need many special tools for engine repairs.
But the flywheel puller is always one of the most important and frequently used for the engine.
Please check the size of the thread on the rotor before ordering.
This puller has a M33x1,5mm thread.
The supplied threaded cap is first screwed onto the stump and fits most models (not all).
Manufacturer: | motorsportgoetz |
Category: | Tools |
SKU: | 19492 |
GTIN: | 8430525194922 |
Type of vehicle: | Motorcycle |
0